JPDA PRODUCTION

JPDA: Monthly Production
Barrels of Oil Equivalent (BOE)

Previous 3 months

MonthProduction (BOE)
Jul '173,579,747.04
Aug '173,187,784.22
Sep '172,468,710.68

Autoridade Nacional do Petróleo

LAFAEK, Well Description

Well: Makikit-1

click for full map


Region:

JPDA

Contact Area:

JPDA 06-102

Field Name:




Well Type:

Exploration

Classification:

Dry Hole with Oil Show



Total depth (m):

3460

RKB (m):

38.4

Seabed (m):

75.1

Start:

19-September-2009

Finish:


Well Data (release):


Status:

Draft



Well Summary

Makikit-1 well was a vertical exploration well drilled in Block JPDA 06-102, Bonaparte Basin, offshore Timor-Leste. The well’s surface location is in water depth of 75.1 m, and is approximately 13.1 km northeast of Bayu-4, 17.2 km northwest of Mistral-1, 22.3 km east of Elang-1, 13.6 km east of Elang-3 and 45.5 km northwest of Fohn-1. Makikit structure is situated about 300 km SW from Dili and 500 km NW from Darwin Supply Base. The well was spudded on the 19th September 2009 using the Ocean Shield jack-up rig.

The primary objective for Makikit-1 is the Callovian Elang/Plover clastic sequences below the Flamingo Formation. This target has been tested but due to the borehole condition problem, most of the data that been acquired were not conclusive enough to confirm the status of the well.

The well’s location and trajectory was purposely designed to explore the hydrocarbon potential of the 3-way dip closure Makikit Prospect’s. The results of the regional tectonic study, combined with well in formation from offset wells and seismic interpretation have incorporated into Makikit-1 final well drilling program.
Makikit-1 was plugged and abandoned as inconclusive result on 2nd December 2009.

TOP OF MARKERS
FORMATION
DEPTH
m MDDF
M TVDSS
SEABED113.575.1
Oliver Formation717678.6
Hibernia Formation758719.6
Johnson Formation15761537.6
Vee Formation20281989.6
Wangaralu Formation25052466.6
Darwin Formation29792940.6
Echuca Shoals Formation30122973.6
Flamingo Formation30713032.6
Elang/Plover Formation32623223.6
TD34603420.6

DATA AVAILABILITY/QUALITY
Open Hole Log Data



Core Data

Sidewall cores acquisition was planned for this well but was not executed due to

operational difficulties.

Wireline Static Pressure / Sample Data

Modular Dynamic Tester (MDT) tool was deployed to obtain reservoir pressures and

sample data as follows:

8.5” section (3216.5-3460 m-MDDF):

• 3 valid pressure points obtained out of 24 points attempted

• Samples were planned but none was taken due to operational difficulties









This page was last updated on 26 June, 2014 For website matters contact us

Disclaimer: ANPM reserves its copyright for materials articles/news (text, photographs, and logos) contained in this entire website.